Canon Pixma E477 Setup

• The primary step is to verify the seal of the package that you bought.
• If the seal is broken, do not open it. Replace it with a new one.
• Else, open the package and take the printer out of the box.
• Verify if the warranty card, user manual, power cord, cartridges, etc., are available in the box.
• Take the power cord and attach one end of it to the printer. The other end should be attached to the power supply.
• Turn on the Canon printer with the help of the Power button.

Ink Cartridge Installation In Canon Pixma E477

• Ink cartridges can be installed with the help of the guidelines given below.
• Canon Pixma E477 uses two cartridges to print: a black cartridge and a color cartridge.
• CL-57S is the color cartridge used, and PG-47 is the black one.
• Use only genuine Canon ink cartridges. Duplicate cartridges might lead to unwanted issues.
• Verify if the Canon printer is turned on and attached to a power outlet.
• Pull out the front cover and wait until the cartridge holder moves to one side of the printer and becomes idle.
• Unwrap the new cartridges from its package.
• Remove the protective film and the orange tape from the top part of the canon ink cartridge.
• Position the cartridge in its respective slot at a slightly slanting position.
• Push it until you hear a click sound.
• Take a test print to see if you have installed the cartridge properly.

Canon Pixma E477 Ink Cartridge Replacement

• Check if the Canon Pixma E477 printer is turned on.
• Pull the scanning unit in the upward direction.
• Wait until the printhead holder goes to the idle state and doesn’t touch anything.
• The ink cartridges are present there. There will be two ink cartridges installed in your printer.
• One of them is a color cartridge, and the other one is black.
• Pull the cartridges slightly upwards and remove it slowly from its slot.
• Keep it aside for recycling.
• Open the new cartridges and take it out of its package.
• Insert it in a slightly slanting position to avoid any damage or misfit.
• Push the cartridge inwards untila click sound is heard.
• Close the front cover and take a test print.

Setting Up A Usb Connection With Canon Pixma E477

• Close all the background apps before initiating the installation process.
• You have to log in as the Administrator to send print jobs to the printer when you need.
• With the help of the Power button, switch on your printer.
• Remove any USB cables attached to it before installation.
• Place the CD in the CD-Drive and close it.
• Double-click the Msetup4.exe file to begin the setup. Tap Yes in the next window to give necessary permissions.
Select the Easy Install option and then select the list of applications that you wish to install with the
• help of the Custom Install option.
• Choose the Use the Printer via USB option in the Printer Connection Method screen to connect via USB.
• Connect your Canon printer and computer with the help of a USB cable.
• Stack the papers in the input tray and print the alignment page.
• To print two pages of the pattern, select the Execute option in the next screen.
• Your setup process is now complete.

Mac

• Prior to starting the installation process, check if there are cables associated with the Mac system.
• Turn on the Canon printer with the help of the Power button present on the control panel.
• Switch on the computer and place the installation CD into your computer’s disc drive.
• Press the Setup icon in the succeeding window that appears. Key-in the Name and Password in the next pop-up window.
• Click the Easy Install option and select the applications that you want to install on your system.
• Select the Use the Printer vis USB option and tap the Next option.
• Associate the USB cable between the Mac and the Canon printer.
• Choose the Execute option in the Print Head Alignment page to print the alignment pattern.
• Verify if you have loaded papers in the input tray prior to printing the alignment page.

How To Print With Canon Pixma E477

• Prior to the printing process, the basic printing setup should be done on your device.
• Check if the Canon printer is turned on.
• Place a few sheets of paper in the input tray after aligning them.
• Open the Printer Driver’s Setup screen in the next step.
• Under the Quick Setup tab, choose the Commonly Used Settings option.
• The Additional Features, Media Type, and the Paper Size will go to its predefined values once you modify the Settings.
• The Print Quality can be set as High, standard, or Draft based on your requirements.
• Choose the OK option to save the settings you modified.
• Open the document or file to print on your device and navigate to the File menu.
• Click the Print option from the drop-down list.
• In the Print Preview dialog box, modify any settings you need and specify the number of copies you want to print.
• Then, tap the Print option to print the document.

Copying With Canon Pixma E477

• Check if the Canon Pixma E477 printer is turned on.
• Papers of appropriate size should be loaded in the input tray after you extend it.
• Place the original documents on the scanner bed and check if the copy side is facing downwards.
• Wrinkled or torn papers should not be placed on the glass. The platen should not contain any dust or fingerprints.
• The Copy button should be pressed on the control panel of the printer.
• Tap the Color button for Color copy and the Black button for a black & white copy.
• Press the Color copy or Black button repeatedly to increase the number of copies to be made.
• The copying process will start in a few seconds.

• You should possess a Google account to print with the help of Google Cloud Print.
• Register with the Cloud Print using the Google Account you have.
• Open Google Chrome on your system and Sign in to Chrome by selecting the Chrome menu.
• Specify the correct credentials of your Google Account in the next window.
• Select the Print option available under the Chrome menu.
• Choose the Change button and select the Destination option.
• Then, you have to choose the Canon E400 series option under the Local Destinations option.
• Tap the Print option to print your file.

How To Scan With Canon Pixma E477

• The original document to be scanned should be placed on the scanner glass with the scan side facing downwards.
• Before starting to scan the document, verify if you have installed the IJ Scan Utility on your system.
• To set the paper size, resolution, etc., you have to go to the Settings option.
• Press the OK button after you modify the settings under the Settings option.
• In the Menu bar, you have to select the Document or photo option based on the type of document you want to scan.
• Choose the Document option if you want to scan a document.
• Else, select the Photo option if you are about to scan a photo.
• Now the scanning process will be initiated.

Canon Print Inkjet/Selphy App

• Firstly, register your device with the Canon Print Inkjet/SELPHY app.
• Check if the printer is turned on and launch the SELPHY app on your device.
• With the help of the Register Printer icon, you have to connect your printer to your device.
• Choose the name of the printer after it appears and then the printer will be successfully registered with the app.
• Then, you have to restart the downloaded applications on your device.
• Next, choose the Select Images option to choose the list of images that you want to print.
• Click the Next option after you are done with selecting the images.
• Choose the Canon printer from which you want to print with, paper size, and any other settings you need.
• Tap the Print option to print your file or document.