Canon selphy cp1300


How to set up Canon selphy cp1300 printer?


Canon Selphy CP1300 Driver & Manual Download

Canon Selphy CP1300 Driver

The driver is a software application that acts as a communication channel between the printer and the system. Go through the given steps to download the driver for your Canon selphy cp1300.

Canon Selphy CP1300 Manual

The manual is a booklet that provides details regarding the Canon selphy cp1300. Follow the given procedure to know how to access your manual.

Canon Selphy Cp1300 Software For Mac


Canon Selphy Cp1300 Wireless Setup

Canon Selphy Cp1300 Wireless Setup

In order to connect your Canon selphy cp1300 with another device, the wireless setup needs to be established. To perform a wireless setup, follow the process given below.

How To Connect Canon Selphy Cp1300 To Wifi

  • Check if the access point is ready for communication.
  • Remove the memory card from your Canon selphy cp1300.
  • Open the Setting screen.
  • Click on the WiFi settings.
  • Choose the Connection Method Via Wi-Fi Network.
  • Access the Direct Connection.
  • Use the arrow buttons and select WPS Connection.
  • Under the WPS Connection, find PBC Method and click it.
  • Press the access point button.
  • Keep pressing the WPS button for a few seconds.
  • Once the connection to the Access point message is displayed, tap ok.

Canon Selphy Cp1300 Ink Cartridge Replacement


Canon Selphy Cp1300 Ink Mobile Printing

Canon Selphy Cp1300 AirPrint

Canon Selphy Cp1300 App

Canon Selphy Cp1300 Print Function

Canon Selphy Cp1300 Print Setup

  • Turn on your Canon selphy cp1300.
  • Install the ink cartridge and enter the required settings on the driver.
  • Load the printer with required A4 sheets.
  • Access the file that is to be printed.
  • Click File.
  • Hit print and the dialog box pops up.
  • Select the required preferences.
  • Tap on print and your printer will now print your documents.

How To Print Passport Photos On Canon Selphy Cp1300

  • Print high-resolution images with Canon selphy cp1300.
  • Go through the steps to print the top-notch passport size photo.
  • Switch on your Canon selphy cp1300.
  • Tap the ID Photo Printing and hit OK.
  • You can now customize the required settings.
  • Click the print icon displayed on the screen.
  • Your Document will now start printing.
  • If you are facing any difficulties while printing your document, call our support team.

Canon Selphy Cp1300 Factory Reset

  • Turn on your printer.
  • Connect your computer with your Canon selphy cp1300.
  • Access the Menu.
  • Click on Device settings.
  • Search for the Reset option under Reset settings and press it.
  • Hit the OK button to start the reset process.
  • Do not assign the printer any tasks until the reset procedure is completed.

Canon Selphy Cp1300 Firmware Update

  • A firmware update is required to use your printer without any error.
  • In some models, the firmware is updated automatically when the device gets connected to the internet.
  • In other models, to perform a firmware update, follow the given procedure.
  • Open the Control Panel.
  • Click on the Administrator option under Control panel.
  • Look if any updates are available.
  • Perform the update process and wait till it gets completed.

Canon Color Selphy MB5420 Troubleshooting

If your Canon selphy cp1300 ever encounters any error, the procedure involved in resolving this error is known as troubleshooting. In case of any error, follow the manual procedures of your Canon selphy cp1300. You can find the steps to troubleshoot the mistakes in the user manual. The manual contains a detailed description of why the error occurs and how to correct it.

The ‘printer won’t print’ error is one of the most common types of errors your printer would encounter. Go through the following steps to resolve this issue.

  • Make sure the machine is switched on.
  • There might be a connection problem with the printer and system.
  • Examine the USB connection between the printer and the computer.
  • Replace them if required.
  • The ink cartridge might be empty.
  • Install a new cartridge.
  • Try taking a test printout.

At times, your Canon selphy cp1300 won’t connect to wifi. To correct this issue, go through the procedure that is given below.

  • Try updating the printer software.
  • Make sure the router is switched ON.
  • The device and the Canon selphy cp1300 might be connected with different networks.
  • Try restarting your Canon selphy cp1300.
  • There might be some mistakes in the Wifi settings.
  • Try reconnecting the printer with Wifi.
  • If the problem remains unresolved, call our service team.

When your Canon selphy cp1300 not found, an error message gets displayed. You need to pursue the given steps to correct this error.

  • Check if the printer is turned ON.
  • Make sure the connection established between the device and the printer is proper.
  • Scrutinize the Wi-Fi setting and check if the entered specifications are correct.
  • The printer might be in sleep mode.
  • Call our support team to correct this issue.

There are occasions when AirPrint won’t work in your Canon selphy cp1300. The method involved in resolving this issue is given below.

  • This error tends to occur if your Canon selphy cp1300 is turned off.
  • Make sure the Apple device and Canon selphy cp1300 are connected to the same network.
  • Check if the AirPrint settings on your device are proper.
  • The router might be switched off.
  • Turn it on.
  • After establishing a connection, take a test printout using AirPrint.

There are times when your Canon selphy cp1300 does not print wirelessly. The cause and the solution for this issue are stated in the procedure given below.

  • Update your Canon selphy cp1300 printer software.
  • Check the wireless settings and reconnect your devices.
  • This issue will occur if the access point is far away from the printer.
  • Make sure the printer is kept at a closer distance to the access point.
  • If your Canon selphy cp1300 and device are connected with a different access point, your printer won’t be able to print wirelessly.
  • Make sure both the printer and the device are connected with the same network.

To resolve the ‘driver not available’ error with your Canon selphy cp1300, pursue the given measures.

  • This error occurs if the driver software is outdated.
  • Update the software before assigning any job to the printer.
  • Check if the driver installed is suitable for your printer and system.
  • Uninstall the previous driver and reinstall a driver which is compatible with your device.
  • This problem might occur if the driver is not installed in your system. Try installing a driver before assigning print jobs.

When the paper gets stuck inside the printer while printing or copying, it is termed as a paper jam. This error tends to occur due to one of the following reasons.

  • A paper jam most likely occur if the paper used is not compatible with the printer or the paper positioned might be wrong.
  • Use only quality paper and make sure to place the paper accurately.
  • This error occurs if the paper tray is overfilled.
  • The required amount of paper must be used.
  • In case your printer experiences a paper jam, stop the ongoing process.
  • Press the back button and try to remove the paper from the machine.

The error codes are numbers assigned to the errors your printer might face. These codes are appointed to each error along with the solution to resolve this problem. Refer the user manual to know more about the error codes.

  • The memory card might not be inserted correctly.
  • Make sure the USB drive is fully inserted.
  • When the printing process takes too long, this issue might occur if the temperature exceeds the given limit.
  • Stop the ongoing process and let the printer cool off.
  • If your device is connected to the access point but cannot print, remove the memory card or USB flash drive.
  • Enter the router password and reconnect with the access point.

Follow the given steps if your Canon selphy cp1300 displays the Busy message.

  • This message gets displayed if the printer is performing any job.
  • Make sure the system is not performing any previous jobs.
  • Restart the Canon selphy cp1300.
  • Pull off the power plug and let the machine rest for a while. Switch it on after some time.
  • If the message is still getting displayed, call our expert to correct this issue.
Canon Support


The site functions independently. We intend to provide service, especially to the Canon printer users. We are, by no means, affiliated to the manufacturer and do not rely on them for providing service. Any image, logo, or trademark mentioned on the site have been acknowledged. We are not liable to any loss or damage occurred in connection to the website or the information contained in it. Go through our statement of policies carefully before using the site.

Copyright © 2021 - 2022 | All rights are reserved