Canon Pixma TS202 is a color inkjet printer that can perform high-end printing at low cost. It can only be connected via a USB cable. The printer supports four colors namely cyan, magenta, yellow, and pigment black. The compact size of this device and the high-quality output makes the printer preferable. Keep reading through the page and get to know how to set up and handle the printer.
Keep it on a flat surface and remove all the packaging material.
Connect the printer to a nearby power source and turn it on.
Lower the front cover, and wait until the cartridge holder halts.
Unwrap the new FINE cartridges and insert them into the cartridge holder.
Make sure the cartridges are firmly fixed into their slots. The black cartridge should be inserted into the right slot and the color cartridge into the left slot.
Close the cover, and continue with the following steps to load the paper.
Raise the rear input tray, and slide the paper width guides out.
Keep a stack of blank paper in the tray and push it in.
Adjust the guides such that they rest against the edges of the paper.
Pull the output tray, and draw the extender. The printer is now all set for the connection.
Canon Pixma TS202 Driver & Manual
Canon Pixma TS202 Driver
Merely connecting the printer to your computer doesn’t mean that you can straightway access all the printer functions from your computer. The printer should be configured on your computer using the printer driver. The driver for the Canon Pixma TS202 printer can be downloaded from the manufacturer’s site or just by clicking the Driver Download button given on the page.
Canon Pixma TS202 Manual
Printer manual is supplied as a small booklet for reference purpose. All the necessary details about the printer, manufacturer, and the printer’s warranty. The instructions for handling the printer and performing various printer functions are printed in the manual. To get the PDF format of the manual, click the Manual Download button.
Canon Pixma TS202 Driver Download
Canon Pixma TS202 Driver Download And Installation
Go to the manufacturer’s site and provide your printer model.
Confirm your operating system and version.
Select the Driver and Software option.
Choose the full feature package and click the Download button.
Wait while the download process is in progress.
If you have a Windows OS, the files save as the .exe file. On Mac, the file saves as the .dmg file.
Extract the files to a storage location on your computer, and proceed with the installation.
Canon Pixma TS202 Driver Installation
Power off your Canon printer if it is turned on.
Delete any previously installed printer driver from your computer.
If you have the setup CD-ROM, insert it into your computer.
Run the setup files to install the driver. If you have downloaded the driver, proceed with the following steps.
Find the downloaded file, and double-click it to begin the installation.
Keep following the prompts until the installation completes.
If prompted, restart your computer. The printer is now configured on your computer.
Canon Pixma TS202 Driver Wireless Setup
Canon Pixma TS202 USB Setup
Begin the installation of the printer driver.
On the installer, select the Start Setup tab.
Select your region and agree to the license agreement.
On the Extended Survey Program, select the Do not Agree option.
In the Firewall settings screen, select the Deactivate the block option and click Next.
Now plug the USB cable from the printer into the computer. Click the Next tab.
Keep following the instructions until the setup is complete. When prompted, select the software to be installed.
Finally, after the successful installation, you will see the Installation completed screen successfully.
Click the Exit tab, and print a document or photo for verifying the setup.
Canon Pixma TS202 Ink Cartridge Replacement
Canon Pixma TS202 Ink Cartridge Replacement
Power on your Canon printer.
Lower the paper output tray and its extension.
Do not try to stop the cartridge holder.
Slightly press the empty cartridge down and take it out from the slot.
Unwrap the new FINE cartridge. Remove the protective tapes from it.
Install the cartridge in slightly slanted position and push it up.
Close the cover, and adjust the printhead position.
Canon Pixma TS202 Check Ink Level
From your application software that you use for opening your document, click File.
Select the Print option and click Preferences to open the Driver Setup screen.
Start the Canon IJ Status Monitor and click the Maintenance tab.
Select the View Printer Status option, and click the Estimated ink level option.
View the level of color and black ink cartridges installed into the printer.
Canon Pixma TS202 Ink Refill
The steps provided below let you check the ink status with the ink lamps on the control panel.
Get a syringe and attach a needle to it.
Fill ink into the syringe, and keep it ready for injecting the ink into the cartridge.
Remove the FINE ink cartridge from the printer.
Place it on a rag. Peel off the label from the cartridge and find the refill hole.
Insert the needle into the refill hole, and eject the ink from the syringe into the cartridge.
Blot out the excess ink using a clean paper towel.
Seal the holes using the label, and reinsert the cartridge into the printer.
Perform a printhead alignment and proceed to print.
Canon Pixma TS202 Print Functions
How To Print Using Canon Pixma TS202 Printer?
Switch on your Canon printer, and open the rear paper tray or support.
Place some plain sheets in the tray and adjust the guides.
Draw the output tray and its extension out.
Check the Paper lamp indication, and ensure that the paper size matches with that of the paper loaded in the printer.
To print photos, open the My Image Garden window. Select the Photo Print icon, and choose the folder comprising the picture that you want to print.
Now select the photo you want to print and click Print.
Set the number of copies you want, and click the Print option again.
When the Print dialog starts, provide the printer’s name, and choose the paper size and other settings. Finally, click Print.
The printer will print your photo with the specified settings.
Canon Pixma TS202 Reset
Resetting the printer restores all the printer settings to factory defaults.
Power on your Canon Pixma TS202 printer.
Use the directional arrows to select the Setup menu on the control panel.
Go to the Device Settings options and select the Reset settings option.
Press OK to start the reset process.
Canon Pixma TS202 Troubleshooting
Troubleshooting is the process of executing a set of instructions for resolving a particular issue. Some of the common printer issues and the instructions for fixing them are given in the following sections.
Make sure the printer is correctly plugged into the wall outlet.
Do not use a surge protector. Keep the connection between the wall outlet and the printer direct.
Replace the power cord if it is damaged.
Press the ON/Stop button on the printer. Turn the printer on again.
Unplug the printer and let it remain inactive for at least 2-3 minutes.
Power on the printer again. If the issue persists, contact your manufacturer and get your printer serviced.
The usa-canon-printer.support site functions independently. We intend to provide service, especially to the Canon printer users. We are, by no means, affiliated to the manufacturer and do not rely on them for providing service. Any image, logo, or trademark mentioned on the site have been acknowledged. We are not liable to any loss or damage occurred in connection to the website or the information contained in it. Go through our statement of policies carefully before using the site.