How To Perform Canon Pixma Pro 200 Setup?

• Unpack and take out the box contents such as ink tanks, print head, multi-purpose tray, power cord, setup CD-ROM, and user’s manual.
• Remove all the protective tapes from the printer and make sure to recycle them.
• Connect the Canon printer to an electrical outlet using the supplied power cord and turn on the printer by pressing the  Power button.
• Set your preferences for language, date, and time on the printer’s control panel.
• Open the paper output tray and the top cover.
• Raise the print head lock lever to its lock position and remove the print head from its package.
• Refix the print head into the print head holder after removing the protective cap.

• Lower the print head lock lever and proceed with installing the ink tanks or cartridges.
• Unpack the ink cartridge one by one and remove the tape before installing it into the ink slot.
• Make sure not to touch the nozzle areas to prevent poor print quality.
• After installing all the ink cartridges into the printer, close the top cover.
• Press  OK on the printer’s control panel and open the paper support.
• Raise the feed slot cover and load some plain paper into it.
• Make sure to adjust the loaded paper with paper width guides.
• Press  OK twice after loading the paper into the paper feed slot and extending the output tray.
• Install the printer software on your computer using the supplied setup CD-ROM.
• When you are prompted to choose the connection type, choose any one option from the following.
• USB connection
• Wired LAN connection
• Wi-Fi connection
• Establish the connection between your printer and the computer and verify the printer functionality after completing the driver installation.

Canon Pixma Pro 200 Usb Setup

• For a USB printer setup, you must have a standard USB cable handy.
• Unplug any USB cable from the printer if you have already connected and wait until you are instructed during the driver installation.
• Verify that you have completed the basic printer settings before proceeding.
• Close all the running programs on your computer and run the driver installation using the CD-ROM that came with your printer during the first-time purchase.
• If your computer doesn’t support the CD-ROM, get the driver package from the official Canon site.
• In the driver installation window, select the  USB connection option as your connection type.
• Carry out the on-screen instructions and establish the connection between your printer and the computer.

Canon Pixma Pro 200 Wired Setup

Simple steps to perform Canon PIXMA Pro 200 setup for wired connection.

• For a wired printer setup, you must have a standard Ethernet cable handy.
• You might be asked to choose the connection method during the first-time printer setup.
• If you wish to connect your printer to the local wireless router, choose the  Wired LAN connection method.
• Next, connect the printer’s Ethernet port and the router’s LAN port using the Ethernet cable.
• Press  OK and check if your printer status.
• If you skipped setting up the printer to the router, you could still continue the wired setup during the driver installation.

Canon Pixma Pro 200 Printer Does Not Print

• If your Canon PIXMA Pro 200 printer is not printing any documents, make sure that you have loaded the paper feed slot with the printer-supported paper.
• Avoid loading wrinkled or curled paper into the feeder.
• Ensure that your printer’s name is selected in the  Print dialog box.
• Check the print settings in the printer driver setup window.
• Verify the USB or Ethernet connection visually. Make sure to firmly plug the USB or Ethernet cable into the correct ports.
• If you have connected your printer wirelessly, check the network status.
• If the problem persists, remove and reinstall the printer driver.
• Sometimes, resetting the printer may resolve the printing problems. To do so, navigate to the printer’s control panel and select  Various settings>Printer settings>Reset settings>Reset all.
• Redo the printer setup after restoring the settings to factory defaults.

Canon Pixma Pro 200 Errors And Messages

When an error occurs on your Canon PIXMA Pro 200 printer, you will be notified with a message on the printer’s LCD panel. Some of the common error messages displayed on the printer’s control panel or computer display are listed below.

• The power was not turned off correctly the last time. Press the Power button when you power off
• Cannot connect to the server. Please wait a while and try again.
• Power cord being unplugged.
• Output error/Communication error/ Writing error.
• Printer driver could not be found.
• Could not print application name.

To fix these errors, you have to identify the cause and proceed with the right troubleshooting steps. If required, you can also refer to the user’s manual to identify the cause for the error message.

• If the printer driver fails to install on your computer, check whether you have downloaded a compatible printer driver from the official Canon site.
• Verify that no firewall or antivirus software is blocking you from installing the printer driver.
• Remove any previously installed printer drivers and ensure that you have a stable Internet connection on your computer.
• Avoid connecting your printer to the computer until instructed during the driver installation.
• Launch the installer after closing all the running programs.
• Agree to the EULA and choose the right connection method.
• If necessary, remove and reinstall the printer driver to fix this problem. If you need remote assistance to perform Canon PIXMA Pro 200 setup, contact us.