Canon Pixma MegaTank G5020 is a smart and cost-effective printer. It has been specially manufactured for those who require a high-volume printer and the printer has a duty cycle of 5,000 pages per month. Scroll down this page to get configure your Canon Pixma megatank G5020 setup.
Let’s now look into the Canon Pixma MegaTank G5020 set Up in detail.
Remove the packing materials and the orange tape from the outside of the printer.
Now, you have to open the top cover of the printer.
Remove any orange tape and protective material from the inside of the printer.
You have now finished the initial stage in the Canon Pixma MegaTank G5020 setup.
Installing the print heads:
First, you need to open the print head locking cover.
Next, start taking out each print head from its package. Also, remove the labels.
You have to remove the protective tape from the print heads.
Now, you need to start inserting the print heads. Install the C (Color) print head on the left side and the B (Black) print head on the right.
You can now close the print head locking cover.
Now, you press down both the joint buttons until they click into place.
You have now completed another stage in the Canon Pixma MegaTank G5020 setup.
Pouring the ink:
First, you need to open the ink tank cover.
Open the tank cap on the left side of the printer.
Now, turn your attention to the ink bottle and hold it upright.
Twist the bottle cap gently to remove it.
Next, align the nozzle of the ink bottle with the inlet.
You have to stand the ink bottle upside down and then push it down to pour the ink into the tank.
Remove the ink bottle from the inlet.
Now, you need to replace the tank cap securely. Next, close the ink tank cover.
Repeat the above procedure to pour all the ink into the respective ink tanks.
You can now close the printer’s top cover.
Powering on the printer:
You have to take the power cable and connect one of its ends to the back of the printer.
Plug the opposite end of this power cable into an electrical socket.
Press the ON button on the printer. This will turn on the printer.
When the language selection screen appears, utilize the Left and Right arrow buttons to choose the desired language.
Press the OK button on your printer control panel.
Loading paper into the printer:
When the Start alignment screen appears, utilize the Left and Right arrow buttons to choose Yes. Next, press the OK button.
It is now time to remove the cassette from the printer and continue with the steps for the Canon Pixma MegaTank G5020 setup.
You have to slide the right paper guide to the right edge. Next, you need to align the front paper guide with the A4 mark.
Load few sheets of A4 or Letter-sized paper such that the printable side faces down.
You have to keep the paper against the front paper guide.
Align the paper guide to the width of the loaded paper.
You can now place the cassette into the printer.
It is now time to pull out the paper output tray.
Continue with the on-screen instructions and then press the OK button.
Make sure that the Ready to connect message appears on the printer’s display after the completing the Canon Pixma megatank G5020 setup.
The usa-canon-printer.support site functions independently. We intend to provide service, especially to the Canon printer users. We are, by no means, affiliated to the manufacturer and do not rely on them for providing service. Any image, logo, or trademark mentioned on the site have been acknowledged. We are not liable to any loss or damage occurred in connection to the website or the information contained in it. Go through our statement of policies carefully before using the site.