How To Configure Canon Pixma Megatank G2260 Unboxing Setup?
The Canon PIXMA MegaTank G2260 three-in-one printer allows you to perform the print, scan, or fax operations over a USB cable connection. This printer comes with some great features like 2-line Mono LCD, document scanning, photo scanning, borderless copy, document copy, document printing, photo printing, borderless printing, card printing, double-sided matte paper support, and more. Keep reading this page to know how to configure your Canon Pixma megatank G2260 unboxing setup.
The following step-by-step instructions explain how to perform the Canon PIXMA MegaTank G2260 printer’s unboxing setup for the first time.
Check whether the Canon PIXMA MegaTank G2260 printer, ink bottles, power cord, print heads, safety & important information, and getting started guides are available inside the box.
Now, take all the components, including the printer, out of the box.
Place the printer on a clean surface and go to the next step of the setup.
Step 2: Unpack the printer
Remove the outer packing materials from your Canon printer.
Next, remove the packing materials inside the printer.
Make sure that the packing materials are removed without damaging the printer parts.
After unpacking the printer completely, place it close to an electrical outlet and move on to the next step of the Canon Pixma megatank G2260 unboxing setup.
Step 3: Install the print heads
Get the print heads provided along with the printer and unpack them.
Now, open your printer’s print headcover.
Install the unpacked heads in their slots.
Make sure that the heads are installed properly.
Close the print head cover.
Step 4: Turn on your Canon printer
Connect your Canon PIXMA MegaTank G2260 printer to an electrical outlet using the power cord provided with the package.
Locate the Power button on the printer’s control panel and press it.
Now, your printer will start to turn on.
Once the printer becomes stable, configure the initial settings.
After setting them, press the OK button.
Step 5: Fill the inlets
Raise your printer’s scanner cover.
Locate the inlet tank and open its cap.
Now, fill the inlet with the corresponding ink.
Similarly, fill all the inlets.
After filling the inlets, close their caps and lower the scanner cover of your printer and continue the Canon Pixma megatank G2260 unboxing setup.
Step 6: Connect the printer to your computer
Congratulations! You have reached the final step of the Canon PIXMA MegaTank G2260 printer setup.
Open the Canon PIXMA MegaTank printer driver file on your computer.
Make sure that your Canon printer is turned on during the driver installation.
When prompted, select your printer model.
Similarly, connect the printer to your computer using a USB cable when prompted.
Finish the driver installation and finally print a test page to check whether the Canon PIXMA MegaTank G2260 printer setup is done correctly.
Contact our technical experts if you need remote assistance in performing the Canon Pixma megatank G2260 unboxing setup.
The usa-canon-printer.support site functions independently. We intend to provide service, especially to the Canon printer users. We are, by no means, affiliated to the manufacturer and do not rely on them for providing service. Any image, logo, or trademark mentioned on the site have been acknowledged. We are not liable to any loss or damage occurred in connection to the website or the information contained in it. Go through our statement of policies carefully before using the site.